NDAS-RT is a multipurpose programmable module designed for seismic monitoring and real-time seismic safety.
It can operate as a node of the Seiscomp 3 networks. The module is specifically designed to expand the networking capabilities of digital seismic sensors produced by R-sensors. However, it can also be used as a standalone device.
The basic features of NDAS-RT include support for CME-xxND and MTSS-xxND series digital seismometers and accelerometers, SeedLink protocol over Ethernet, 6 auxiliary ADC channels and two groups of relay contacts to control external devices.
Modifications are available with additional network interfaces including RS-485, CAN, Wi-Fi, GSM / 3G / LTE, Bluetooth, etc.
An open platform running Linux allows widely adapting the NDAS-RT software to the specific tasks of filtering, processing and transmitting the seismic data.
NDAS-RT allows greatly expanding the capabilities of data loggers having COM- or USB-ports only. Special software modules can develop a complete seismic station with a SeedLink server and a web interface to configure the instrument remotely and to view the signals. This solution is ideal for users of Delta-Geon, Baykal-ASN and other data loggers.
Application notes on using NDAS-RT to construct real-time monitoring systems for a bridge as an example.
Characteristics Delivery and warranty
|Supply voltage||12-24 V Nominal (9-36 V permissible)|
|Power consumption||1 - 1.4 W depending on load|
|Temperature range||-40...+85°C - индустриальная SD-карта|
|ADC sampling rate||1, 5, 10, 25, 50, 100, 125, 250, 500, 1000 Гц|
|Dimensions||225 x 160 x 55 mm|
|Reference generator stability||0.3 ppm|
|Case material||Aluminum, waterproof|
|Number of channels||Auxiliary ADC: 6 single-ended or 3 differential channels|
|Data recording mode||continuous, event onset|
|Data recording format||miniSEED|
|Data storage||internal microSDXC cards of up to 512 GB, any volume external USB drives|
|Data transfer||SeedLink over Ethernet|
|Inbuilt sensors for device health monitoring||temperature, humidity|
|Case connectors||Russian type 2RMG (2РМГ-18Б7Ш) – power, RS-485/CAN, Russian type 2RMG (2РМГ-24Б19Ш) – auxiliary ADC channels and relay outputs, SMA-F – connection of GPS/Wi-Fi antenna (optional)|
|Delivery set||USB type A/B standard cable, 8P8C connector for IP68 cable, power connector for cable, auxiliary ADC connector and relay outputs for cable|
|GNSS timing accuracy||-|
|Auxiliary ADC||12 bit; 6 single-ended or 3 differential channels; input range ±10 V single ended; ±20 V differential channel|
|Additional network options||Wi-Fi, GSM / 3G / LTE, Bluetooth, CAN, RS-485|