Data logger Baykal-8 v.3

A high-resolution 6-channels seismic data logger "Baikal-8" can be used for recording the signals from external seismic or various sensors with high precision and synchronization with UTC. 

The device can be used for long-term seismic and geophysical measurements including operations under field conditions. 

The Ethernet support allows for using the standard solutions for connecting several devices into a network. FTP and SeedLink support gives possibilities to use the standard software for remote data retrieval.

Characteristics Delivery and warranty

Clip level 5 mm/sec
Frequency range 0.008 (120 sec) - 40 Hz
Dynamic range at 1 Hz
Cross-axes sensitivity
Non-linearity at 1 Hz1
Temperature range -40°C - +55°C - extended range
Supply voltage 10.5-30 V DC, single-ended. Nominal value – 12 V
Power consumption < 600 mW
Cold-start time 15-45 min
Connector type FQ24-10Z
Delivery set FQ24-10Z type cable, 8 Gb MicroSD card, GPS antenna
Weight 2.2 kg
Dimensions 170 х 80 х 180 mm
Case rugged case for field surveys
ADC sampling rate 1, 10, 50, 100, 250, 500, 1000 Hz
GNSS timing accuracy < 1µs
GNSS receiver GPS / GLONASS
ADC noise performance
Gain coefficients 1, 2, 4, 8, 16, 32, 64
Data recording mode Continuous, Schedule
Data recording format Internal binary, miniSeed, SEG converters provided
Inbuilt sensors for device health monitoring
Data transfer USB 2.0, Wi-Fi
Data storage 32 Gb (flash)
ADC sampling rate 24 bit