Seismic data logger module NDAS-8224

The NDAS-8224 seismic data logger module is designed for battery-powered autonomous data acquisition systems including land and ocean-bottom equipment. 

The module has an extremely low power consumption in the operation mode that is less than 300 mW. It is optimized for operating with the MTSS-2003 three-component active geophone and СМЕ-4211/4311-OBS low power ocean-bottom seismometers.

The data transfer and system configuration can be carried out via wired USB or wireless Wi-Fi connection while 32 GB of onboard NVRAM allows for a long-term autonomous recording. The module is fully operational while powered from a USB port. 

The wireless connection makes it possible to remotely set up the system as well as to perform the quality analysis of the data being registered without interrupting the system. The data logger is able to emit test signals such as various frequency sinus or 1-second length pulse and has an additional ±2.5 V DC power source for powering hydrophones.

Click here for available downloads to operate NDAS-8224. If the FTP-connection fails, right-click to copy the link and open it with Windows Explorer.

Characteristics Delivery and warranty

Availability in stock
Dynamic range 131.8 dB
Supply voltage 5 - 12 V Nominal (4 - 17 V permissible)
Power consumption 300 mW
Temperature range -20...+85°C - standard SD-card
-40...+85°C - industrial SD-card
Number of channels 4
Gain coefficients 1, 2, 4, 8, 12
ADC sampling rate 1, 10, 50, 100, 125, 250, 500, 1000 Hz
ADC resolution 24 bit
Reference generator stability 0.5 ppm
5 ppb - OCXO underwater version
Data recording mode continuous, schedule
Data recording format internal binary; miniSEED, SEG converters provided
Data storage microSD 32 GB
Data transfer USB 2.0, Wi-Fi
Inbuilt sensors for device health monitoring temperature, pressure, humidity, supply voltage
Case connectors SMA-A for GPS antenna, SMA-A for GLONASS antenna, USB-B, miniUSB, DB15
Delivery set
GNSS timing accuracy < 1µs
GNSS receiver GPS / GLONASS
Auxiliary ADC -
Additional network options -
Case material 2 joint boards in one module
Dimensions 95 x 80 x 29 mm
Weight 0.2 kg