Combined sensor CME-206C
The CME-206C six-component combined sensor gains the benefits of the METR-13 highly sensitive seismometer and the MTSS-2003 three-component active geophone.
The combined sensor has 3 axes of rotational motion and 3 axes of linear motion.
The combined sensor is made in an aluminum case protectinng against harsh external conditions and has a compact size and light weight.
It is used to measure strong seismic signals, monitor industrial vibrations, analyze vibration isolation and seismic safety systems.
The combined sensor has 3 axes of rotational motion and 3 axes of linear motion.
The combined sensor is made in an aluminum case protectinng against harsh external conditions and has a compact size and light weight.
It is used to measure strong seismic signals, monitor industrial vibrations, analyze vibration isolation and seismic safety systems.
Characteristics Delivery and warranty
| Frequency range | 1 Hz - 100 Hz |
| Sensitivity | 250 V/(m/sec) |
| Clip level | ±0.1 rad/s and ±0.02 m/s |
| Self noise at 1 Hz | 1,25*10^-7 rad/sec for angular and 10^-7 m/sec for linear channels |
| Sensitivity axes | 1 linear (vertical) |
| Supply voltage | 12 V Nominal (10.5 - 16 V permissible) |
| Power consumption | 50 mA |
| Temperature range | -40...+55°C |
| Maximum installation tilt | Any |
| Output impedance | 500 Ohm |
| Cold-start time | 1-30 min depending on low-frequency cut-off |
| Maximum output swing | ±5 V, single-ended output |
| Case material | Aluminum |
| Dimensions | 150 х 150 х 110 mm |
| Weight | 2.7 kg |