The METR-11 three-component rotational seismometer is similar to the METR-01 seismometer, but its frequency range is optimized for seismic exploration.
The instrument is reliable and easy to use and can be set up at any angle to the horizon.
The instrument is reliable and easy to use and can be set up at any angle to the horizon.
A typical cold-start time is no more than 15 minutes.
Characteristics Delivery and warranty
Frequency range | 1 Hz - 150 Hz |
Sensitivity | 50 V/(rad/sec) |
Clip level | 0.1 rad/sec |
Self noise at 1 Hz | 2*10^-7 rad/sec in 10–150 Hz passband |
Sensitivity axes | 3 rotational orthogonal |
Supply voltage | 12 V Nominal (10.5 - 16 V permissible) |
Power consumption | 12 mA nominal |
Temperature range | -40...+55°C |
Maximum installation tilt | Any |
Output impedance | 500 Ohm |
Cold-start time | ~15 min depending on low-frequency cut-off |
Maximum output swing | ±5 V, single-ended output |
Case material | Enduring plastic |
Dimensions | 80 x 82 x 55 mm |
Weight | 0.28 kg |