Combined sensor CME-206C

The CME-206C six-component combined sensor gains the benefits of the METR-13 highly sensitive seismometer and the MTSS-2003 three-component active geophone.

The combined sensor has 3 axes of rotational motion and 3 axes of linear motion.

The combined sensor is made in an aluminum case protectinng against harsh external conditions and has a compact size and light weight.

It is used to measure strong seismic signals, monitor industrial vibrations, analyze vibration isolation and seismic safety systems.

Characteristics Delivery and warranty

Frequency range 1 Hz - 100 Hz
Sensitivity 250 V/(m/sec)
Clip level ±0.1 rad/s and ±0.02 m/s
Self noise at 1 Hz 1,25*10^-7 rad/sec for angular and 10^-7 m/sec for linear channels
Sensitivity axes 1 linear (vertical)
Supply voltage 12 V Nominal (10.5 - 16 V permissible)
Power consumption 50 mA
Temperature range -40...+55°C
Maximum installation tilt Any
Output impedance 500 Ohm
Cold-start time 1-30 min depending on low-frequency cut-off
Maximum output swing ±5 V, single-ended output
Case material Aluminum
Dimensions 150 х 150 х 110 mm
Weight 2.7 kg