NDAS-8226 is a seismic data logger mostly designed for autonomous data recording in field environments.
NDAS-8226 is based on a 6-channel 24-bit resolution ADC ensuring a low noise level. The data logger uses a USB and Wi-Fi connection for data transfer and system configuring and a 32 Gb internal memory storage.
NDAS-8226 includes a precision regulated VCO quartz crystal with the real-time GPS/GLONASS clock adjustment. This provides synchronization accuracy better than an error of timing of 1 µsec. The case is rugged and waterproof.
This data logger does not require any maintenance and is well-suited for field seismic and seismological surveys as well as for permanent seismic stations. NDAS-8226 is perfectly compatible with R-sensors' products of CME, MTSS and METR series as well as any third-party equipment.
Characteristics Delivery and warranty
|Dynamic range||131.8 dB|
|Supply voltage||12-24 V Nominal (9-36 V permissible)
5 V from USB (4.5-5.5 V permissible)
|Power consumption||600 mW|
|Temperature range||-20...+85°C - стандартная SD-карта
-40...+85°C - индустриальная SD-карта
|ADC sampling rate||1, 10, 50, 100, 125, 250, 500, 1000 Hz|
|Dimensions||160 x 140 x 80 mm|
|ADC resolution||24 bit|
|Reference generator stability||0.5 ppm|
|Case material||Aluminum, waterproof|
|Number of channels||6|
|Gain coefficients||1, 2, 4, 8, 12|
|Data recording mode||continuous, schedule|
|Data recording format||internal binary; miniSEED, SEG converters provided|
|Data storage||microSD 32 GB|
|Data transfer||USB 2.0, Wi-Fi|
|Inbuilt sensors for device health monitoring||temperature, main supply voltage|
|Case connectors||2x10-pin 2PM connector, 1x7pin 2PM connector (all Russian made), 2xSMA-F for GPS/GLONASS antenna and Wi-Fi antenna, USB-B|
|Delivery set||2x2PM 10-pin connector, 1x2PM 7-pin connector, USB-2PM cable, USB A-B cable, GPS/GLONASS antenna, Wi-Fi antenna|
|GNSS receiver||GPS / GLONASS|
|GNSS timing accuracy||< 1µs|
|Additional network options||-|